IPS Power

IPS | Three Phase Based Transformer

.

Three Phase Based Transformer

Based transformer UPS:

Power rang :(10-300kVA) pf : 0,8

Based transformer UPS, PWM controlled, IGBT technology, microcontroller controlled, sinusoidal waveform, ONLINE Double Conversion topology and parallel configurable devices. Advanced communication system supports many communication protocols and brings remote control advantage of the UPS.

  • Online Double Conversion technology
  • Rack and tower case options
  • Power factor corrected input
  • REPO input (NO or NC programmable)
  • Static bypass system, VAT transfer system
  • Output voltage regulation, low output THD
  • Optional battery temperature compansation
  • Online technology, advanced self diagnostics
  • Battery options for longer battery backup time
  • Fully digital DSP controlled system, PID control
  • User selectable easy voltage, frequency and setting
  • Cold start from batteries, Rack an Tower case options
  • 128 log event records (5000 alarms) with date and time
  • LCD alphanumeric display, mimic lamps, 5 control buttons
  • Output short circuit protection (isolated from bypass input)
  • Output overhead protection, 150% overload capacity
  • Automatic battery test, Front panel lamp test system
  • Deep battery discharge protection, Boost charge
  • Battery capacity and battery remaining time indicator
  • Maintenance bypass switch, Cabinet inside temperature sensor
  • RS232 communication interface, management software, SNMP, MODBUS
  • Dry contact outputs (NO or NC programmable) 3 relays standard 2 option
  • IPM power module, Output current limit, Operation mode selection (Online or Offline) .
TECHNICIAL SPECIFICATIONS
Nominal power (kVA) 10 – 300
INPUT
Voltage 220/380 VAC (230/400 VAC) 3ph + N + Earth ± %15
By-Pass Voltage 220/380 VAC (230/400 VAC) 3F + N ± %10
Frequency 50Hz / 60Hz ± %5
OUTPUT
Power (kW) 8 – 240
Power factor 0,8
Voltage 220/380 VAC (230/400 VAC) 3F + N
Voltage tolerance ± %1
Frequency 50Hz / 60Hz
Frequency Tolerance ± %2
Efficiency (at 100% load) %88-90
Output current crest factor 3:1
Overload %100 – %125  for10 min
%125 – %150 for 1 min
> %150 transfer to by-pass
Short circuit protection yes
THD < %3 (linear load)
< %5 (Non linear load)
BATTERIES
Type Sealed lead Acid
Number 30
Float charging voltage 405 VDC
Float / End of discharge voltage 300 VDC
Operating temperature 25ºC
Battery protection Battery insurance / Battery low – Battery high protection
Automatic Testing Auto / Manual
GENEL
Standards EN 62040-1, EN 62040-2
Serial communication RS232
Software T-MON UPS
Operating temperature 0ºC – 40ºC
Cooling Forced cooling
Relative humidity < %90 (non-condensing)
Protection class IP20
Altitude < 2000m
Noise level < 56 dBA
OPTIONS
Input / Output voltage Please ask
Input transformer Optional
Input THDI 10% (12 Pulse or 18 Pulse repressor, according to KGK strength)
5% (18 Pulse repressor, + filter, up to 100 KVA
Input Voltage regulation 0.95 – 0.98 (up to 100 kVA with 18 Pulse repressor)
Parallel Operation N+1 (up to 4) Device sizes may differ in 18-pulse UPS
Communication SNMP, MODBUS, Remote monitoring panel, RS485